Blog

A crew member checks a camera mount on the hood of a silver picture car on a closed city street while a colleague holds a call sheet.

Call Sheets for Vehicle and Driving Scenes: Routes, Rigging, and Safety

How to build a call sheet for vehicle and driving scenes, covering drivers, picture cars, routes, permits, rigging times, staggered calls, and the safety briefing.

A call sheet for a vehicle or driving scene should name every driver and picture vehicle, spell out the exact route and road control in place, and give rigging, safety, and company move times as separate line items, not as a single general call. Driving days fail in predictable ways, usually because the car, the driver, the permit, and the camera rig were treated as one note instead of four separate confirmations. Build this call sheet like a safety document first and a schedule second, and the day runs calmer for everyone.

What should a call sheet include for a driving scene?

Start with the vehicles. List each picture car by make, model, color, and plate, and name who delivers it, fuels or charges it, and holds the keys between takes. Then add working vehicles, such as a camera car or process trailer, with their drivers named separately from cast.

  • Drivers: name every driver, note the license check was completed, and list a phone number that works inside the vehicle.
  • Route: attach or link the route map, with start point, turnaround point, stopping places, and the total loop time in minutes.
  • Road control: state whether the road is closed, private, or open with traffic control, and name the permit holder and the officers or marshals on site.
  • Rigging: list each mount, hood, door, interior, or roof, with the crew responsible and the time rigging starts.
  • Fuel and backup: note fuel or charge level at call, the nearest fuel stop, and what happens if the picture car breaks down.

Allow at least 90 minutes for a first rig of the day. Suction mounts, safety straps, cable runs, and a slow test roll take longer than the estimate on paper, and a rushed rig is the one that gets sent back. Put that 90 minutes on the call sheet as its own line.

How do you schedule call times when vehicles are involved?

Stagger the day in layers. Rigging and vehicle prep come first, then the drivers and safety lead, then camera and sound, then cast, who should arrive to a vehicle that is already checked and positioned. If cast arrive before the car is ready, they wait in costume while the light changes, and the schedule pressure lands on the safety briefing, which is exactly where pressure does not belong.

Work backwards from the first take. If it is at 8:00 a.m., try rigging at 6:00 a.m., driver and picture car at 6:15 a.m., a low speed route rehearsal by 7:15 a.m., and cast in the car at 7:45 a.m. That leaves a 30 minute buffer for a loose mount, a dead battery, or a blocked route.

Confirm drivers separately. A driver who confirmed a general call may still have missed that the start point moved, or that they are driving the camera car, not the picture car. With Easy Call Sheets, each person gets their own call time, confirms with one tap and no account, and gets an .ics file with their own location and notes.

What belongs in the route and permit section?

Treat the route as a location in its own right. Give start and end addresses, direction of travel for each pass, where vehicles reset, and where crew may stand. If the route uses a public road, name the permit, the hours it covers, and who can pause or stop the work. A pass that leaves the permitted stretch is a new setup, not an improvisation.

Add communications too. State the radio channel for drivers and for traffic control, and that no driver uses a handheld phone while moving. Name one person as the single voice who calls rolling, cut, and reset. When 2 or 3 people give moving instructions at once, drivers hesitate, and hesitation on a road is a safety problem.

Weather matters more on driving days. Rain changes braking distance and mount adhesion, and low sun can blind a driver on a morning pass. Easy Call Sheets adds an automatic weather forecast for the shoot date and location, so you can decide the night before whether the first pass should move 30 minutes.

Safety briefing, rehearsal, and the abort call

Hold the safety briefing at a fixed time listed on the call sheet, for drivers, cast who ride or drive, camera, rigging, and traffic control. Cover speeds, following distance, passing rules, what happens on a cut, and where a vehicle goes if something feels wrong. State that driving safely comes first, the shot second, and any driver can call an abort without justifying it in the moment.

Rehearse at low speed before the first real take. A slow pass proves the route, radios, mount, and reset point in about 10 minutes. Skipping it costs more, because the first take becomes the rehearsal and problems surface at full speed with cast in the car. Note the rehearsal on the call sheet so nobody treats it as optional.

Finally, plan the vehicle wrap, not just company wrap. Note who returns each car, where keys go, who removes rigs and checks for damage, and when road control is released. One line naming one person prevents the end of day dispute about a scratch or a missing key.

Frequently asked questions

Does a driver need a separate call time from the cast?

Yes. Drivers and rigging crew usually work 60 to 90 minutes before cast on a driving day, and a separate call time with its own location and notes keeps them from arriving at cast holding instead of the vehicle lot. Individual call times are also easier to confirm and to revise if the rig runs long.

What if the route or start point changes the night before?

Revise and resend the call sheet rather than relying on a group text. Easy Call Sheets lets you revise and resend with one click, and the Pro plan at $9 per month adds shareable links, weather forecasts, file attachments, custom branding, and SMS notifications, plus reminder texts for unconfirmed crew. The free plan costs $0 and includes unlimited productions with 2 email sends per month, which covers a small test shoot.

Should the permit and route map go out with the call sheet?

Yes, attach them or link them from the call sheet so every driver and department head works from the same version. A route described from memory in a parking lot at dawn is how a camera car ends up waiting at the wrong reset point while the picture car circles alone.